UPDATE: I fixed it!! It was the PSU.

So I just built my first PC in like 20 years. Everything was going fine, I was installing Windows and got to the network setup step and my wifi was having trouble staying connected. I figured it was because I hadn’t set up drivers yet, so I thought whatever, no problem, I’ll just move it by my router and plug in an ethernet cable.

So I powered off and moved it, and…dead. Nothing is happening when I hit the power button. No fans, no lights, nothing. I’ve made sure no cables got jiggled loose or anything. Maybe I shorted something somewhere on the motherboard? I can’t see anything without fully disassembling and having to rebuild it. I really don’t want to do that, but I guess I’ll have to unless I’m missing something obvious. I’ll test the PSU tomorrow but I doubt it’s that, these are all brand new parts.

Any ideas?

Specs:

AMD 7800X3D

ASRock B650E PG Riptide WiFi

Sapphire Nitro+ Radeon RX 7800 XT

2 x 16GB Crucial DDR5 RAM

Seasonic GX-850 PSU

  • @[email protected]
    link
    fedilink
    19 months ago

    This helped me once: remove ram, hold power button for 30 seconds, insert ram, insert power, try to power on.

    • @[email protected]OP
      link
      fedilink
      19 months ago

      Thanks, I’ll try that tomorrow. I did try holding the power button down for 30 seconds with the PSU off, but not with the ram removed.

  • @[email protected]
    link
    fedilink
    19 months ago

    It might sound silly, but did you make sure the PSU power switch is turned on? Have you tried jumping the front panel pins on the mobo instead of using the power button? Made sure cables are securely plugged in on the PSU as well as the mobo? Tried plugging it back in to the original outlet that it worked at before?

    • @[email protected]OP
      link
      fedilink
      19 months ago

      I did try all those things as a sanity check. I also tried unplugging everything from the PSU and motherboard and plugging them back in and still no lights :(

  • Shadow
    link
    fedilink
    19 months ago

    Disconnect the psu from all the devices, use a wire or paperclip to short the green wire on the atx connector to black wire.

    If the psu doesn’t turn on, that’s where your problem is. If it does, it may be your mobo or something else.

    If your atx connector doesn’t have a green wire, google for which pin it is to turn the psu on manually.

    • @[email protected]
      link
      fedilink
      English
      18 months ago

      Yes, for standard 20 or 24 pin PSUs this is fine (which is almost assuredly what you have if you’re building your own). Nonstandard ones, like what Dell or HP use, rarely work like that.

    • @[email protected]OP
      link
      fedilink
      08 months ago

      I didn’t :(

      I admittedly haven’t had much time to mess with it, but I confirmed the PSU is working, so I suspect the motherboard is fried. Still need to confirm that before I order a new one, and figure out why it happened so I don’t do that again. I’m hoping my CPU is still fine.

      I really appreciate everyone’s suggestions, helped me narrow it down a bit

      • @[email protected]
        link
        fedilink
        English
        08 months ago

        Just because the PSU works on another system (or God forbid, those awful “testers”) doesn’t mean that it’s fine. PSUs tend to fail in weird, unpredictable ways

        • @[email protected]OP
          link
          fedilink
          18 months ago

          You were correct. PSUs be weird.

          I purposely went with Seasonic because I did not want to run into power supply issues, but here we are.

          Got a new one and am up and running

      • @[email protected]
        link
        fedilink
        08 months ago

        Dang! Best of luck getting it sorted. You might be able to return he mobo as defective if it was nothing you did to cause it.