As someone who moved to a place where everything practical is metric it’s much easier. We do have a combination of traditional units for a couple of minor things (room/property size, alcohol size) but they’re almost always posted side-by-side with metric. We do get screens and some tires in inches, but those also always have metric with them. Most Japanese probably also don’t realize that the unit is inches because it’s basically a “60-type TV” not a “60-inch TV”.
considering we want to get closer to EU and further away from US it would make sense. Exporting feet yards and gallons doesn’t work for non-US. BUT entire country is hooked on imperial- all construction supplies and hardware are primarily imperial, all the training is done imperial, windows and doors are all imperial. So it’s.not an overnight thing but steps could be taken, say, over a decade or so to shift further away from imperial
I’m always annoyed that a 2x4 is neither 2” nor 4”.
A4 paper for everyone, coast to beautiful coast.
ISO 216 REPRESENT LET’S GOOOOOOO
What I think is hilarious is that even the imperial system uses metric.
The inch is defined in millimeters
I mean, we’re as metric as you wanna be. I’m unfortunately poisoned by imperial measurements but I still use metric plenty.
I moved to Canada from Australia 5 years ago and was dumbfounded by the amount of American measurement still in use. It’s been an interesting exercise for my ageing brain to figure out how to do math with fractions of an inch etc. I’m also baffled by the number of people using American date format!
We’re trying though - I’m installing new flooring in my house and the size written on the box is 7.5" x 48" x 10mm - that gave me a chuckle.
I had hoped that the current discontent with the US would prompt more people to cringe at using their measurement system, but nobody seems to see the connection.
I love how outside temperature is in C and inside temperature (or pool water) is F
7.5" x 48" x 10mm
Canadian consciousness lol
How warm is it? 21C
How tall are you? 5’11”
How much do you weigh? 175? 82? I dunno
How far is it? About 40 minutes
What time is it? Noone is sure this week
What time is it? Noone is sure this week
I hope people at least know what time it is in their province… but I have no fucking clue what it is all across Canada now 😂
Lots of us had clocks that didn’t update properly, tech was confused as shit lol
Who is still using the imperial system in Canada?
Try being in agriculture.
Hell, I have to clarify what type of bushel a line company is quoting prices for oats in.
What does the dial on your oven say? 350°?
My oven is scaled in deg C. Not yours?
Trades, architecture, engineers, railways, weights and measures people from industry Canada, aviation, roadwork, steelmills, steelworkers, coffeeshops, farmers, clothing, textiles, restaurants, recipes, and many more!
I suppose you don’t live in Canada? Imperial is everywhere.
“I suppose you don’t live in Canada? Imperial is everywhere.” … 🙄
I suppose you don’t know as much about Canada as you think you do.
I could add to your list btw, but not with that attitude of yours.
I didnt mean anything by that.
Trades - except electricians apparently
Try to buy wire in mm2 and watch the guy at the electrical supply counter look at you like you have 3 heads.
Tried to get an M5 bolt for my bicycle at a Canadian Tire once and the guy all but used the f-slur at me
Good point - but they sell it by the metre. Aaarrrggghhh
Officially it’s all metric. Everyone i know or ever met uses a combination of imperial and metric.
Aren’t we officially already fully metric?
So is the US.
But we use imperial on things sold to the US.
I believe so, but this guy wants to go after everything else like getting trades to use it and make metric the default setting on electronics.
IDK if thats the best plan or if he realizes what an uphill battle certain things might be. Like ovens; our oven somehow switched over to metric on thanksgiving and it totally messed me up, I spent a LOT of time figuring out how to change that back to F. Another issue is industries that just aren’t going to want to change: aviation, boats I think are imperial, railways are, home building, etc.
We’re inching towards it…
Ha. Nice.
You don’t buy much lumber I guess.
2x4 is just a name/label now. They haven’t been those inch dimensions in a very long time.
That’s not a shrinkflation thing, that’s a nominal vs. finished size. A 2x4 has been 1.5x3.5 since planed lumber has been a thing, well over a century. You can still buy roughcut 2x6 that are really 2"x6".
Did you see the picture. Original 2x4 was 2inch x 4inch. Then there was the planing in the middle, then the even smaller planing.
Yes. And I’m explaining for anyone thinking this picture represents some sort of reality of the enshittification of finished lumber that nominal is not finished and graded size and hasn’t been since 1919.
The 2x4 (rough) has had a finished size of 1.5x3.5 for well over a century, there was a very brief time it was standardized at 1-5/8x 3-5/8 but that was a pain in the ass for carpenters and mills. You can still buy unplaned lumber that is the full 2x4 or 2x6 dimensions, but it’s ungraded and not suitable for anything but fences. It will not pass a building inspection.
This picture isn’t saying anything useful.
The picture shows an original 2x4, then the planed downsize later on, and then a modern further reduction to get more boards out of a log. Its not enshitification in our current world we live in, but shows how you get less wood these days. But my original point never mentioned enshitification, I was just showing that a 2x4 is a label, because the sizes changed over time and we call it the same.
It may not be 2" by 4" but go try to buy a 38mm by 89mm
That’s what I mean, it has become a label, rather than a size. Like how a #10 drill bit is 0.19"
