Just discovered a much easier way to grind my coffee in the morning and felt dumb because it was so obvious, figure there’s some good stories out there about this type of thing out there
Just discovered a much easier way to grind my coffee in the morning and felt dumb because it was so obvious, figure there’s some good stories out there about this type of thing out there
In most of the places I’ve lived, I’ve had hot water fixtures that gradually started dripping again no matter how tightly I turned them off—I figured the problem was that the valves were weakened from being overtightened, and I was faced with the tradeoff of continuing to overtighten them and gradually making the problem worse, or undertighten them and dealing with the drip.
But recently I realized the real issue was that the valves were shrinking after they cooled off. So I changed my routine: after using the hot water, I’d shut the water off lightly, then wait 30 minutes for the valve to cool and tighten it again.
“wait 30 minutes”
ಠ_ಠ
Ain’t nobody got time for that.
In practice, I just tighten all the hot water fixtures before I leave the apartment.
I just turn it to cold for like 3 seconds before shutting it off. There’s still a little dripping, but far less than when I shut it directly after running hot water.
I guess that works if you’ve got a single valve, but in my case the hot and cold are physically separated.