• prenatal_confusion@feddit.org
      link
      fedilink
      English
      arrow-up
      0
      ·
      15 days ago

      If you are jokeing and referring to the fairytale then I get it.

      Otherwise: no it’s not a tinderbox. I work in construction as a carpenter and we encoubterbthis building method and the fire argument sometimes. Fire needs fuel and an oxidant. No oxygen after the little that is in there and the worst thing is a slow glim and even that won’t happen. The walls covering this straw are made from f30 material that can withstand fire, you guessed it, for 30 minutes. So no flash fires In seconds.

      Another example is blow in inaulwyion made from cellulose recycling. News paper. It has been used for at least two decades in Germany and is never thr cause for a fire.

        • prenatal_confusion@feddit.org
          link
          fedilink
          English
          arrow-up
          0
          ·
          edit-2
          15 days ago

          It is usually in between timber frames. Standalone I haven’t encountered it.

          Edit: it is foremost used because of the great insulation and room climate properties. Also it is renewable and local. So a bunch of pluses.

      • A_norny_mousse@piefed.zip
        link
        fedilink
        English
        arrow-up
        0
        ·
        15 days ago

        Another example is blow in inaulwyion made from cellulose recycling.

        Ugh, I guess you meant insulation? And yes, this stuff is widely used in Finland, too.

      • foodandart@lemmy.zip
        link
        fedilink
        English
        arrow-up
        0
        ·
        15 days ago

        Massively well built for insulation properties. The biggest thing to bedevil this building material is water. Would absolutely love a small house built with packed straw or even better, cob.

        • prenatal_confusion@feddit.org
          link
          fedilink
          English
          arrow-up
          0
          ·
          15 days ago

          Water in any kind of insulation or basic material (even concrete) would be bad in terms of insulation properties but also in lasting damage to the building substance.

        • prenatal_confusion@feddit.org
          link
          fedilink
          English
          arrow-up
          0
          ·
          15 days ago

          Rockwoll is the worst. It handles poorly, it is not renewable, it is energy intensive to manufscture, if its older than 1970 it is likely manufactured with asbestos and most importantly it had those tiny scratch fairy’s that attack you for days to come.

          I learned recently that the phase shift of rockwoll is terrible because of its low (thermal) mass. Meaning that it will become saturated rather quickly and then dissipates heat onwards. For a few years (20?) there has been an alternative made from wood fibre that is bound together by some degradable agent and impregnated with amonia salts (not great but loads better than the alternatives). it is recyclable as I’m the company picks up the offcuts and reuses them. But most importantly its high mass (15kg per m²?) Is perfect for home roof insulation because it keeps most of the absorbed energy for about 12 hours before it’s saturated. Keeping you cooler during the day and radiating inside and outside at night. Its called gutex and is very versatile.

          Edit: it comes in fluffy and light style too as gutex thermowall. More like rockwoll I guess I can’t recommend it enough. There are generic manufacturers too I am sure.

      • grue@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        15 days ago

        That reminds me, I should add some more inaulwyion to my attic this fall.

          • SchmidtGenetics@lemmy.world
            link
            fedilink
            English
            arrow-up
            0
            ·
            15 days ago

            It can be, it was/is in Canada, treated for rodent resistance, so not hard to do flame too.

            Straw has its own issues, if it gets wet, it can spontaneously combust. The heat from decomposition is enough, and it’s self oxidizing too iirc. It being sealed is what makes it easier, the heat can’t escape.

            • prenatal_confusion@feddit.org
              link
              fedilink
              English
              arrow-up
              0
              ·
              edit-2
              15 days ago

              Treatment: thanks for the Info

              Comvusrion: that’s news to me. I guess it needs to be very specific conditions for that to happen. If I know anything about German rules and regulations is that they are overly thourugh here and would have tested this to death. And there is a very strong insulation lobby by chemical companies here, so there is an incentive to stop these new (old?) techniques.

              Edit: though about the combustion and the only thing that makes sense to me is a large mass where heat is trapped and has a runaway reaction like a compost.

      • Vathsade@lemmy.ca
        link
        fedilink
        English
        arrow-up
        0
        ·
        15 days ago

        What if the f30 material is damaged or air gaps left by installer?

        How resilient and sensitive to flaws in construction?

        • prenatal_confusion@feddit.org
          link
          fedilink
          English
          arrow-up
          0
          ·
          15 days ago

          Then you violated the building code. Regarding fire and arguably more importantly air tightness to prevent condensation and resulting water damage.

          In attics its mandatory to do a blow out test where you create overpressure and search for air movement and leaks with a smoke machine.

          Rule of thumb is outer walls wind tight, inside perimeter walls air tight. (Diffusion open)

            • MinnesotaGoddam@lemmy.world
              link
              fedilink
              English
              arrow-up
              0
              ·
              15 days ago

              That’s what the permitting process is (theoretically) for: to ensure specific, potentially dangerous repairs and construction are done according to safety code.

              Hypothetical situation: If you have to get a permit to do general contractor work, and the hole you find violates code, I would assume you would be expected to repair the hole. depending on the size of the hole (are we talking pinholes? Nails? How do you mount shit to a stud on a wall built out of haybales? Is the stud buried in the bale or extra thick to accommodate the thicker wall? I’ve never worked with one of these hay walls, the idea of them is so neat) I’d talk to the owner specifically about how I was repairing it so they could repair any other holes themselves, as that would likely not be the job I was hired to do. I haven’t worked construction since high school tho so ymmv.

            • prenatal_confusion@feddit.org
              link
              fedilink
              English
              arrow-up
              0
              ·
              15 days ago

              That wouldn’t be good for a bunch of reasons. Mainly because the owner is obviously stupid.

              That being said, I’d argue that Cars aren’t safe because if you light a fire under it and wait for a few minutes it goes up in flames.

              Same reasoning.

              • droans@lemmy.world
                link
                fedilink
                English
                arrow-up
                0
                ·
                15 days ago

                Farmers have known for thousands of years that wet straw can spontaneously combust and you’re saying people can’t put a nail in their wall or install a new outdoor light?

                What happens if you have a pinhole leak in a pipe?

                • prenatal_confusion@feddit.org
                  link
                  fedilink
                  English
                  arrow-up
                  0
                  ·
                  15 days ago

                  First: don’t drill into walls from the outside if you don’t know what’s going on. True for all kinds of insulation. Wet polystyrene is also a disaster, albeit being not as fiery.

                  Second: don’t drill into pipes. For that there are regulations to. Where are conduits supposed to be located and therefore you know where (not) to drill. If it still happens it’s another human error and in my opinion as dangerous as nicking a powerline and creating a small glow (unlikely today thanks to gfci and such).

                  but to the larger point you made: i am sure that if you put a lot of straw in a pile and add water and wait and settle that it will generate heat. Composts come to mind. That takes a lot of thickness for the heat to overcome thermodynamic equilibrium and start to burn. Thr straw in the wall is sealed. But not for heat but air transit. As you can see in the picture of the article that wall has a thickness of about 50?cm, which is not enough to create that heat pile effect when wet. The heat would be dissipated, I am sure.

                  And what I am even more certain of is German regulations being overly thorough to the point of being anal. There is no way that this hasn’t been tested to death especially with the strong chemical company’s lobby here.

        • RipLemmDotEE@lemmy.today
          link
          fedilink
          English
          arrow-up
          0
          ·
          15 days ago

          I watched a strawbale building demonstration 20 years ago where they torched a stuccoed strawbale structure that had no treatments: the fire reached over 2000°f and when it was cooled, they cut open the stawbales and showed the fire didn’t burn the bale more than an inch deep. They really do not burn due to the lack of oxygen.

          Water on the other hand can rot out a whole wall if it’s not sealed.

          • MinnesotaGoddam@lemmy.world
            link
            fedilink
            English
            arrow-up
            0
            ·
            15 days ago

            I watched a strawbale building demonstration 20 years ago where they torched a stuccoed strawbale structure that had no treatments:

            Are you a firefighter or family because those are the only folk I can think of who get to go to those and they sound fun as hell

        • Courtney (she/her/they) @lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          0
          ·
          15 days ago

          People in construction know what they’re doing and in general know what they’re talking about.

          Unfortunately, that excellently constructed home they spent so much effort on will still be sitting there in 5, 15, maybe 50 years from now. And all that time it’s definitely not getting all it’s proper maintenance, and will slowly be dropping in quality.

          I doubt these buildings would go up hindenburg style, but after a decade or two of being lived in, fires will not be as easy to put out in a home like this.

          Source: not a construction worker, but have worked in construction for a few years here and there and have been working with fire for several decades (and working to make fire safe to handle and trying to fireproof a couple garages)

          • LilB0kChoy@reddthat.com
            link
            fedilink
            English
            arrow-up
            0
            ·
            15 days ago

            And all that time it’s definitely not getting all it’s proper maintenance

            That’s a human problem, not a problem with the material and would affect any home built with any material. Also, what kind of maintenance requires you to open up the walls?

            I doubt these buildings would go up hindenburg style, but after a decade or two of being lived in, fires will not be as easy to put out in a home like this.

            Anything to support this besides your assumptions? Straw has been in use for a very long time and, generally speaking, this statement doesn’t hold up.

            https://www.nachi.org/straw-bale-home-basics-history.htm

    • gwl [he/him]@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      0
      ·
      15 days ago

      Nah, they smolder, they don’t burn.

      It does mean that if a fire is already started and gets past the burn temperature they basically just will burn themselves to ash but not spread